Recipe To Make Cannabis Oil For Chemo Alternative!

OUR WEBSITE :

Recipe To Make Cannabis Oil For Chemo Alternative!

Over the past few years, people became increasingly more familiar with the power of cannabis as a potential remedy for cancer. The studies carried out over the last years confirmed the anti-cancer effect of the plant, without leaving any doubt behind.

Cannabinoids (any group of related substances that contain cannabinol and active substances of cannabis) have the ability to activate the cannabinoid receptors in the body. The body produces endocannabinoids, compounds that play crucial role in numerous crucial processes that create a healthy environment.

Radiation and chemotherapy are the only approved cancer treatments, however people should understand that there are other alternatives too. Exploring these choices, it’s never bad, and if people just knew about all the other alternatives, they would sure have the ability to make the best choice on their own.

Many people chose this alternative treatment to fight cancer and live longer, and the number of people who become aware of the healing power of this plant increases every day. “How is it used?” is the next question to be asked.

You can either do a research on your own or find more information about Rick Simpson’s hemp oil.

Rick Simpson is a medical marijuana activist, and he has been giving people information about the healing properties of hemp oil medications for a long period of time. His own experience motivated him to help other people, after he cured his metastatic cancer in 2003.

We give you the original recipe for Rick Simpson’s cannabis oil

To start with the preparation, the first thing you need is an ounce of dried herb. One ounce offers 3-4 grams of oil, although the quantity of the oil could vary strain to stress. A pound of dried marijuana usually produces about 2 ounces of high quality oil.

ESSENTIAL: The instructions are summed up from Rick Simpson’s site. Be very careful when boiling the solvent off (solvent-free alternative), because the fumes are very combustible. DO NOT smoke, and AVOID sparks, stoves and red hot heating elements. Make sure to place a fan near in order to blow the fumes far from the pot, and prepare the oil in a well-ventilated space.
#1. Place the material in a plastic bucket (make sure the herb is totally dry).

#2. Use the solvent you chose to dampen the herb. You can use various solvents (solvent-free option), including pure naphtha, ether, butane, 99% isopropyl alcohol, and even water. To extract the THC from one pound you need 2 gallons of solvent, and 500 ml is enough for an ounce.

#3. Use a clean, untreated wood or anything similar to crush the product. Even though the herb will be rather moist, you will be able to crush it easily because it is pretty dry.

#4. Continue crushing the product and keep adding the solvent at the same time until the herb is completely soaked. Stir the mixture for three minutes. In this phase the THC from the herb is liquified into the solvent.

#5. Pour the solvent oil mix in another pail or container. Now the herb has lost about 80 % of its THC.

#6. Second wash: repeat the process by adding the second dosage of solvent, and stir for another three minutes to dissolve the remaining THC.

#7. Pour the solvent oil mix in the container where you poured the first mix.

#8. Dispose of the herb material.

#9. Strain the solvent mix into a clean container using a coffee filter.

#10. Boil the solvent– you can use a rice cooker, because it will boil the solvent perfectly, and it might hold over half a gallon of the solvent oil mix.

IMPORTANT: avoid stove-top, red hot elements, stimulates, smoking and open flames– the fumes are very combustible!

#11. Fill about ¾ of the rice cooker with the solvent mix and switch on HIGH heat. Remember to operate in a well-ventilated area and do not forget to place a fan near the fumes to blow them away from the pot. Keep adding the solvent to the cooker as the mix evaporates until you have added even the last drop to the rice cooker.

#12. As the quantity decreases for the last time, add a few drops of water– 10 drops to a pound of dry herb. This step will release the solvent residue, and secure the oil from the heat.

#13. When there is an inch of solvent-water mix left, use oven mitts to pick the unit up and swirl the material until the solvent mixture finished boiling off.

#14. At this moment turn the rice cooker on LOW. Be careful, the oil should never reach a temperature higher than 290 ˚F (140 ˚C).

Don’t Forget To Follow Us On Other Social Media :

YouTube :
Facebook :
Twitter :
Pinterest :
Instagram :
Daily Motion
Google Plus :
Tumblr :

Subscribe our channel for more!